A well-functioning dash cam, like the popular Nexar models, is an essential tool for any motorist. Making sure your device is running smoothly can sometimes require a simple yet effective trick – resetting.
How to Reset Your Nexar Dash Cam
Whether you’re resetting a Nexar Light, Pro, Beam, or NEXC2, the process is the same. As for the other Nexar models, there are slight variances depending on the firmware you’re using. Follow the instructions for each Nexar dash cam model provided in the table below:
| Your Nexar Dash Cam | Your Reset Steps |
|---|---|
| Nexar Light, Pro, Beam, NEXC2 | 1. Establish power connection for your dash cam. 2. Nine-time press on the Power button. 3. Act on the voice prompt directions. 4. Expect a voice prompt indicating a successful restoration to factory settings. 5. Your dash cam should restart after a successful reset operation. |
| NEXC1 with firmware 1.2.0 or 1.2.8 | 1. Connect your NEXC1 to its power source. 2. Long-press the Power button until it shuts down (usually around 15-20 seconds). 3. Wait for your NEXC1 to power back up. 4. A flashing red light signifies a successful reset. If it’s solid, a quick press on the Power button is needed. |
| NEXC1 with firmware 1.3.2 | 1. Power up your NEXC1 by connecting it to a power source. 2. Tap the WiFi button 9 times, then an additional tap for confirmation. 3. Respond to the instructions given by the voice prompt. 4. A voice prompt confirming the reset to factory settings should be heard. 5. Your NEXC1 should restart after the successful completion of reset. |
| Scosche NEXS1 | 1. Power the NEXS1 by connecting it to its power source. 2. Press the Sync button 9 times. 3. Follow the guidelines from the voice prompt. 4. Hear the voice prompt stating the reset to factory settings is successful. 5. The NEXS1 should reboot post reset. 6. The appearance of a flashing red light is a good sign. If it’s solid red, a single press on the Power button is required. |
Powering Up
No matter which Nexar dash cam you own, the first step in your dash cam factory reset involves connecting your device to a power source. This isn’t just plugging it into the nearest outlet, though.
Your Nexar model requires a reliable current of electricity, typically supplied through your vehicle’s USB cable port. Using a specifically designed power adapter safeguards your device from any potential electrical mishaps.
Your Gateway to Resetting
Your journey to resetting your Nexar dash cam now takes you through the Nexar app. It is here that you’ll access the essential settings for resetting your device. In these settings, you can adjust various features, including format type, video resolution size, frame rate caps & more. See our guide on how to format an SD card instead of resetting your entire dash camera.
The Big Reset
The grand finale to resetting your Nexar dash cam lies in the Nexar app itself. Under “Reset All Settings,” a single tap of the Reset button resets all settings to their default factory values, including WiFi dash cam, audio, and settings.
However, exercise caution here. If any dash camera cables disconnect during your reset process, make sure to reconnect them immediately. Remember, all of your customizations you’ve made previously are going to be lost upon reset.
Final Words
Resetting a Nexar Dash Cam is a straightforward process when you know the steps to follow. By connecting your device to a power source, syncing your phone, using the Nexar app, and pressing a few buttons, your dash cam will be restored to its default settings.
Always remember to back up any important data before initiating the reset. With that being said, a few Nexar dash cams offer special access to the Nexar Cloud, read our full article on it for important details like how to upload & download footage from the cloud to make sure you always have a backup handy.
About the Author
1 thought on “Resetting Nexar Dash Cams”